| Model | Product Model | MV-CL084-91CM-PRO |
| Type | 8K pro Camera Link linescan Camera,5μm，Mono |
| Performance | Sensor type | CMOS |
| Pixel size | 5 μm |
| Resolution | 8192 × 16 |
| Image mode | Supports 1-line, 2-TDI, and 4-TDI Supports multiple lights control: 2-lamp/3-lamp/4-lamp |
| Max. line rate | Multiple lights control disabled or 1-lamp: 20 kHz (Base), 40 kHz (Medium), 75 kHz (Full), 75 kHz (80-bit) 2-lamp: 10 kHz (Base), 20 kHz (Medium), 40 kHZ (Full), 50 kHz (80-bit) 3-lamp: 6 kHz (Base), 13 kHz (Medium), 27 kHZ (Full), 33 KHz (80-bit) 4-lamp: 5 kHz (Base), 10 kHz (Medium), 20 kHZ (Full), 25 kHz (80-bit) |
| Configuration mode | Base, Medium, Full, 80-bit |
| Tap geometry | 1 × 2, 1 × 4, 1 × 8, 1 × 10 |
| Tap number | 2 Taps, 4 Taps, 8 Taps, 10 Taps |
| Pixel clock | 40 MHz, 66 MHz, 80 MHz, 85 MHz |
| Dynamic range | 57.8 dB |
| SNR | 41.3 dB |
| Gain | Supports 1.2 ×, 2.7 ×, and 4.6 × |
| Exposure time | 3 μs to 10 ms |
| Exposure mode | Off/ Once/ Continuous exposure mode; supports fixed exposure time, trigger-width exposure |
| Mono/color | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Trigger mode | External trigger, internal trigger |
| External trigger mode | Line trigger, frame trigger, line + frame trigger |
| Electrical feature | Data interface | Camera Link (SDR connector); USB interface for updating firmware |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input and output × 4 (Line 0/1/3/4), and support single-end/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Power supply | 24 VDC |
| Power consumption | Typ. 22.9 W@24 VDC |
| Mechanical | Lens mount | M72*0.75, optical back focal length: 12 mm (0.5"), applicable to F-mount via lens adapter |
| Dimension | 84 mm × 84 mm × 89 mm (3.3" × 3.3" × 3.5") |
| Weight | Approx. 883 g (1.9 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: -20 °C to 60 °C (-4 °F to 140 °F) Storage temperature: -30 °C to 80 °C (-22 °F to 176 °F) |
| Humidity | 5% to 90% RH, non-condensing |
| General | Client software | MVS and frame grabber software meeting with Camera Link Protocol |
| Operating system | 32/64-bit Windows 7/10 |
| Compatibility | Camera Link V2.0, GenICam |
| Certification | CE, RoHS, KC |
